Ningbo Nuoya cement brick machine factory is a professional production of brick manufacturers, the main products are: eight hole plate Mianshaozhuanji, brick, 10-15 8-15 6-15, Mianshaozhuanji, brick Mianshaozhuanji, 4-40 4-25, 4-15 brick brick and other products. The company has a standard modern factory, first-class R & D team and advanced production equipment. Mianshaozhuanji produced by national patent has been sold to more than and 30 provinces, municipalities and autonomous regions and exported to foreign markets, by the user’s praise. Let us look at the process of using brick in what skills?
1, when the motor is running, it will cause the motor to be burned, the reason is that the total pressure regulating valve of the equipment is too large. The total pressure regulating valve should be adjusted gradually until the motor is running. Timely adjustment and inspection is the operation of the machine. The power line hollow brick machine equipment in the power system with 25 mm or 16 mm aluminum more than 2 more than 2 of the copper wire. The normal operation of the device when the input voltage is: high voltage 380V-410V, low voltage 330V-360V, the machine must have reliable ground brick
2, when the lack of your vibration vibrator, there will be a long period or a loose brick brick, and die under the pressure of the pressure caused by excessive pressure, inhibited the vibrator vibration, should be under the support cylinder tubing corresponding to the pressure regulating valve pressure adjustment alone. Caused by mold, the balance arm and host parts appear welding or damage, is the lower die under the pressure of the pressure regulating small reasons, because the pressure will die locked, cause mould and vibrating table impact force is too large, thus affecting the whole set of equipment parts, should be the pressure regulating valve pressure gradually turn, to stabilize the machine vibration force.
3, out of the brick when the brick surface is loose, the brick body has broken phenomenon, or when the brick on the upper die with the lower die, the reason is that the pressure on the head is too small: can not locate the brick face loose.
4, if the pressure relief valve failure, is due to pressure relief valve pressure valve damage, then the same model should be replaced with the pressure spring.
5, if the oil cylinder oil leakage phenomenon, the reason is that the sealing part of the cylinder body sealing effect is not good, should be timely replacement of the corresponding models of the sealing parts.
6, concrete hollow Mianshaozhuanji equipment operation matters should be carefully read the product manual, do the production before each operator should be a full range of training, assessment of qualified until.
Send your message to us:
Post time: Jun-03-2017